Bluer Plus(BLU-5) i3-style 3D Printer - TwoTrees

I had issues with the z axis not traveling smoothly so I removed the belt (the motors run off the same driver so the belt isn’t necessary)

Now the printer works great.

Make sure to replace the stock bowden tube with Capricorn.

Until I recieved my Two Trees Bluer Plus (Blu-5) I had never even seen a 3D printer in person. I had never had experience with laser engraving prior to ordering a Two Trees TTS-55 Laser Engraver in May, 2022 either. Right off the bat I was extremely happy with the engraver and after researching the entry level 3d printers on the market I was confident the Blu-5 was the right choice for me, especially since the print size capacity and other features seemed to be better than others and at a better price. I was not disappointed.

I ordered the Blu-5 on August 3rd, 2022 and it was delivered on August 8th. It couldn't have been packaged any better without being packed in a wooden crate. Every part was fit snuggly into it own niche carved out within the dense foam packing material with all the tools and accesories required for assembly, including a USB card reader and Micro-SD card which contained the software and documentation.

After I had it up and running for a little while, I noticed the connection at the build plate wasn't quite like the connector I had seen on some of the YouTube reviews. I was already a member of official Two Trees groups on Facebook so I enquired about it to one of the Admins. After their investigation of my order it was determined to be among the first lots shipped. Soon afterwards I was sent the files necessary to print the part I needed. So, within hours I had assembled, started using, asked for help, provided with the files and printed the part I needed. Can't ask for much more than that.

The quality of the pieces I have printed are spectacular in my opinon. The "Benchy" is just as it came off of the printer, no post processing whatsoever. The video was made with a machine I printed from files that I found on Thingiverse.com

I have also included some picture of Lithophanes I printed. One was printed from Cura at "Standard Quality - 0.20mm" and the other at "Super Quality - 0.12mm"
To say the least I am VERY impressed that such things can be made by someone with ZERO prior experience.

A big Thank You to Two Trees for making my first endeavors with these technologies a huge success!

Long story short, this was an upgrade from and old Anet8 clone. This printer performs like a champ. Very easy and quick to assemble. I've got 40 hour on it and still going strong. Excellent and clever design which makes assembly super easy. The setting this printer are in the latest version of Cura when you 'add printer'. I'm using the Linux version of Cura with the generic pla settings and I got excellent results. Also my first ever attempt to print with TPU came out great. Make sure to adjust the bed rollers, mine were a little loose. Check you-tubes for more info. Also adjust the left and right z axis lead screws to sync the height, mine was off by 0.5 mm, just to give you and idea.

I got this based on a laser engraver i got from this company. I figured if the engraver was good quality, then why not give their 3d printers a shot. Im glad I did, for the cost/benefit ratio this is worth its weight in gold. I may pickup a few more if I decide to expand the army.

Setup was super easy, and I was up and printing within 20 mins. File setup and calibrating was easy. Used it to print these hexagon wall shelves, it works perfect with all types of material ive thrown at it so far.

If you want a 3d printer that wont break the budget, and you get your moneys worth, scoop up one of these. If something changes with it, I'll update this review, but so far ive had it running nonstop for nearly a month now and it shows no signs of slowing down.

Great printer! It has all of the extras that you normally have to upgrade later. This is my 4th 3d printer build and was one of the easiest. The software is fine. I use it with Cura. The plate lost its adherence so I cleaned it with alcohol and sprayed a light adhesive and it's sticking well again. The ethernet connection didn't work with my desktop or laptop so I have to use the micro SD. Quiet compared to other printers. Huge build area. Worth the money.

Update - It’s been a few weeks now and I have had zero problems! I have had it running more than twelve hours nearly every day and have had no trouble with it! Overall the best value out there.

Highly recommend!