【Räumungsverkauf】 Bluer Plus (BLU-5) 3D-Drucker im i3-Stil – TwoTrees

Good packaging, but long delivery.
The original assembly of the printer is quite simple. Good completeness.
Spring-loaded wheels on the z-axis work normal.
And yes it's big, really big.
Interesting printer for upgrade.
Convenient location of the access hatch to the board.
Not bad hardware on the 1.2 board.
Good drivers on the axles.
Noisy without additional modifications.

Everything works out of the box, fast delivery, the second mat came separately, which made me doubt the integrity of the delivery, but everything arrived, I recommend

The first printer. Very satisfied! Collected in an hour. Held out all the bolts. All were badly twisted.
The power supply fan makes a really loud noise. But, no problem! I will print a new cover and put the 92nd fan. Easily found the 3D cover layout according to the power supply model.
In the Internet a lot of videos about setting up the printer. There were no problems. I recommend to purchase.
Delivered in 1 week at Moscow time

Delivered in 3 days from a Russian warehouse, personally in hand to the door. The printer is quiet, it is worth a BMG extruder and hotend volcano. But there are nuances: a very loud power supply, or rather a cooler in it. It is useless to lubricate, or change the cooler or like me for a non-cooler BP. second: the thread breaks on the filament sensor, but on the well-known site there are a bunch of different models in this regard. In general, the printer on solid 5, comes almost assembled, 4 bolts in the base screw in and coil holder. Do not run test printing from a flash drive, there is horror. I set up the table in just 2 minutes, the bltouch is great. I recommend for purchase

Good printer, but it doesn't hurt to put straight hands together properly, the components are of high quality, in general everything is fine